Congratulations to the 2013 NT4D Poster Award Winners
Through-process Modeling for Cold Spray Alloy Optimization, Ms. Danielle Belsito, Worcester Polytechnic Institute
Design of a Superhydrophobic Superoleophobic Liquid Aerosol Barrier, Dr. Hoon Joo Lee, North Carolina State University
The Application of Silver Nanowire Coated Film in Military Electronics, Dr. Robert Monson, Carestream Advanced Materials
Miniaturized Nanoenergetic Divergence Thrusters for Impulsive Projectile Control, Mr. Clay Staley, University of Missouri
Nano-carbon Conductive Elastomer, Dr. Mei Zhang, Florida State University
2013 Poster Session
Be sure to visit these distinguished poster paper authors in the Presido I – IV Ballroom.during the event.
High-rate Manufacturing of 3D Products with Micro and Nanostructured Surfaces, Dr. Carol Barry, University of Massachusetts Lowell
Cold Spray Modeling: Simulating Particle Impact as a Tool for Predicting Properties of a Cold Sprayed Deposits, Mr. Luke Bassett, Worcester Polytechnic Institute
Numerical Process Control Modeling of the Laser Assisted Cold Spray Material Deposition Technique, Mr. Aaron Birt, Worcester Polytechnic Institute
Manipulating Adsorption of Ionomers in Layered Double Hydroxides, Mrs. LaDena Bolton, Clark Atlanta University
Changing Physical Characteristics of Vertical Carbon Nanotubes Grown between Mica Sheets, Mr. Nicholas Briggs, University of Oklahoma
Lightweight, Low Cost Nanomaterial Shielded Cables and Harnesses, Mrs. Megan Caprio, San Diego Composites, Inc.
Wear Resistant Titanium Powders- TITRIX for Coatings, Dr. Bhanu Chelluri, IAP Research, Inc.
Nano Technology and Electromagnetic Phenomena: Control of Magnetic Properties via Electrical Input Utilizing High -K Dielectric Nano-constituent Ultra-thin Film Materials to Enhance the Converse Magnetoelectric Effect, Ms. Melanie Cole, Army Research Laboratory
Manufacturing-friendly Processes for Mass Production of Silicone Nanotube (SINT) Anodes for Next Generation Li-ion Batteries, Dr. Jyoti Dalvi-Malhotra, Brewer Science, Inc.
Biomimetric Synthesis of Hybrid Nanomaterials with Antimicrobial Activity, Dr. Matthew Dickerson, Air Force Research Laboratory
Three Dimensional Graphene/Graphite Structures Templated on Engineered Highly Porous Ni/Cu Foams, Prof. Emma Fan, University of Texas at Austin
Ordered Arrays of Ultrahigh-speed Rotating Nanoelectromechanical System (NEMS) Devices Assembled from Nanoscale Building Blocks, Prof. Emma Fan, The University of Texas at Austin
Integration of UV-cured Ionogel Electrolyte with Carbon Paper Electrodes in a Coplanar Supercapacitor Test Bed, Ms. Stephanie Flores, U.S. Army Natick Soldier Research, Development & Engineering Center / Tufts University
Investigation of Carbon Nanotube Templates to Enhance the Sensing Capabilities of Protein Embedded Nanofibers, Dr. Ericka Ford, U.S. Army Natick Soldier Research, Development & Engineering Center
Breathable and Protective Fabrics Based on Carbon Nanotube Membranes, Dr. Francesco Fornasiero, Lawrence Livermore National Laboratory
Electrical Characterization of Multi-walled Carbon Nanotube Sheet Material at RF Frequencies, Dr. Jonathon Foster, Raytheon
Roll-to-Roll Silver Nanowire Transparent Conductive Films and Inks Enabling Flexible Antennas and Sensors, Mr. Andrew Fried, Carestream Advanced Materials
Electronics-grade Carbon Nanotube Solutions for Commercial Applications, Dr. Stephen Gibbons, Brewer Science, Inc.
Low-cost Metallic Gratings as Platforms for Ultra-sensitive Plasmonic-enhanced Chemical and Biological Sensors, Mr. Steven Hamm, University of Missouri-Columbia
Scaling CNS Infused Shielding into Cable Manufacturing, Dr. Stefanie Harvey, TE Connectivity
Nanometal Fuels, Nanothermites, and Nanoadditives for Propulsion, Dr. David Irvin, Systems and Materials Research Corporation
Nanomaterial Framework and Screening Tools: Techniques to Meet Health and Safety Goals, Mr. Alan Kennedy, U.S. Army Engineer Research and Development Center
Biofunctionalized Sensors to Enable Human Performance Monitoring, Dr. Steven Kim, UES, Inc. at AFRL
60-inch Nano Adaptive Hybrid Fabric (NAHF-X) System - Commerical-size Scale-up of Hybrid Fabrics for Multifunctional Compsites, Dr. Paul Kladitis, University of Dayton Research Institute
Reversing Coagulopathy and Internal Hemorrhage with Functionalized Nanoparticles, Mr. Damien Kudela, University of California, Santa Barbara
Novel Method of Nanosizing and Deagglomeration of Materials, Mr. Eric Kuramoto, THINKY USA, Inc.
Single-walled Carbon Nanotube/Polystyrene Composites: Effect of Polymer Stereochemistry on Nanocomposite Formation, Ms. Laurisa London, Clark Atlanta University
Integrated Electrophoretic Capillary Nanofluidic Biochip for Separation of Long DNA Molecules (ECField-NanochipTM), Dr. Edgar Mendoza, Redondo Optics, Inc.
Gold Nanoparticle Synthesis using Spatio-temporally Shaped Femtosecond Laser Pulses: Post Irradiation Auto-reduction of Au(III), Dr. Johanan Odhner, Temple University
Functional Conductive Polymeric Nanofibers as Antibody Sensors, Ms. Omotunde Olubi, Clark Atlanta University
Energy Harvesting with Nano Antennas and Tunnel Diodes, Dr. Martin Peckerar, CoolCAD Electronics, LLC
Synthetic Approaches for Utilization of Active Polyoxometalate Compounds for Decontamination, Dr. Brian Rasley, University of Alaska Fairbanks
Plasmon-coupled Exciton Photoluminescence with Purcell Enhancement, Mr. Quinton Rice, Hampton University
Pilot Scale Coating Process of Fluorodecyl Polyhedral Oligomeric Silsesquioxane (Fluoro-POSS) Based Omniphobic Coatings, Mr. Michael Sieber, U.S. Army Natick Soldier Research, Development & Engineering Center
Self-healing, Chromate-free Pretreatment for Magnesium Alloys: From Beakers to Drums, Dr. Ganesh Skandan, NEI Corporation
Enhanced Reactivity of Energetic Nanomaterials Using Protein Cages, Dr. Joseph Slocik, Air Force Research Laboratory
Development of a Paper Based Roll-to-Roll Thermal Nanoimpting Machine, Mr. Byungwook Son, University of Massachusetts Lowell
Impact of Nanoparticles in Aquatic Models: Sea Urchin’s Immunity and Development, Dr. Ashok Vaseashta, Norwich University Applied Research Institutes, International Clean Water Institute & Institute for Advanced Sciences Convergence
Manufacture of Hierarchical, Multifunctional Structural Composites Using a Novel Scalable and High Energy-efficiency Nanoengineering Technique, Dr. Jialai Wang, The University of Alabama
Progress in Reactive Self-decontaminating Additives for Polyurethane Topcoat, Dr. James Wynne, Naval Research Laboratory
One-step Synthesis of Dendritic Gold Nanoflowers with High Surface-enhanced Raman Scattering (SERS) Property, Ms. Sijia Yi, University of Tennessee
Joint Effort between AMRI/UNO and ST2 for Developing Nanostructure Based Chemical Sensors for Detection of Toxic Chemical Simulants, Dr. Weilie Zhou, Advanced Materials Research Institute (AMRI)
Cancer Immuno-chemotherapy Using Fungal Nanoparticles, Dr. Mingjun Zhang, The University of Tennessee at Knoxville
2012 NT4D Poster Award Winners
Functionalized Graphene for Formation of Self-Assembled Nanoenergetic Composite with Enhanced Combustion Performance, Dr. Shubhra Gangopodhyay, University of Missouri-Columbia
First In Man Synthetic Nanofiber Trachea, Dr. Jed Johnson, Nanofiber Solutions
Innovative Materials for Defense Applications: Composites, Rubber, Batteries, and Foams Enhanced by Molecular Rebar, Mrs. Wendy Hoenig, Designed Nanotubes, LLC
Direct-Write Technologies for 3D Assembly of Nanostructures, Dr. Kate Duncan, Space and Terrestrial Communications Directorate, CERDEC-SITCD
